Using real time guitar effects :s

Hi Rimshot,

Here's what you have to do, step by step to create a simple multi effects patch:

1) create a new document (File -> New)
2) create a master module (Patch -> New module -> RP master -> Dual-Channel Clock-Free Master Module)
3) create a signal switcher module (Patch -> New module -> RP processor -> Routers / Matrix -> 4-Way Switch)
4) connect master input(s) at the top of the screen to the switcher input (top pin) by draging with your mouse
5) create the effect modules you want to use (Patch -> New module -> VST effect...)
6) connect each effect chain to the switcher outputs
7) connect all effect chains outputs to the master outputs at the bottom of the screen
8) enter edit mode (Ctrl+2)
9) dispatch all GUIs (Dispatch -> Automatic GUI dispatch)
10) enable power and play (Ctrl+4)

See attached file for a patch example.

Note: in this example, 4 different effect chains are created but only one is in use at a given time, depending on the switcher module "position" control.

.